Syntho-QuickSet™ Epoxy

Syntho-QuickSet™ is a fast setting, Kevlar™ reinforced, adhesive and repair epoxy system. this adhesive sets rapidly in thin films, even under adverse, humid conditions.  The Syntho-QuickSet™ is a good choice for many bonding applications, pipe repairs, concrete repairs, and chemically resistant coatings.  Excellent chemical resistanse against: Gasahol, Sydrol, Distilled water, Inorganic acids, Alkalies and Dilute Acetic Acids.

- Fast thin film time

- Good chemical resistance

- DOT non-corrosive

TYPICAL PROPERTIES

MIXING INSTRUCTIONS

Surfaces must be clean and grease free. Use an oil free

solvent such as acetone to wipe surfaces. Adhesion can be

substantially increased by abrading the surfaces to be

bonded with emery cloth, sand paper, carbide grinding tools

sand blasting, etc.. A roughened, porous surface will produce

the best results. Any oxidized metal films should be removed

just prior to application of the epoxy adhesive mixture.

Thoroughly mix by weight 100 parts Epoxy to 13 parts Catalyst.

Apply mixed product within five to ten minutes.
 

Resin

Catalyst

Color

Grey

Amber

Viscosity, 25°C, cps

Paste

4,000

Spec gravity, 25°C

1.56

1.10

Mix ratio, by weight

100

13

Thin film set time, 25° C

1,5 hrs

Gel time, 100 grams, 25° C

15 min

Flexural strength, psi

16,700

Flexural modulus, psi

377

Tensile strength, psi

9,400

Description

Product #

Number/Case

Tensile modulus, psi

493

1 lb kit

SQS01C

12

Elongation, %

2.5

4 lb kit

SQS04C

5